Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC Runtime and Logo 8

Created by: AutoGen_783019 at: 2/12/2016 11:58 PM (4 Replies)

Rating (0)

Thanks 2

5 Entries

2/12/2016 11:58 PM	Rate (0)
AutoGen_783019 Regular Member Joined: 4/28/2015 Last visit: 11/23/2023 Posts: 10 Rating: (0)	Can someone tell me if there is drivers for the Logo 8 in the WinCC Runtime files please so I can control the Logo from a PC Regards Darren

Suggestion To thank Quote Answer

2/13/2016 5:58 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/9/2023 Posts: 31592 Rating: (3928)	Not in Runtime, but as you create the WinCC project. There you have to create your connection, depending on the version of WinCC you must select either S7-200 or (if available) a logo as a partner.

Suggestion To thank Quote Answer

2/13/2016 5:07 PM	Rate (0)
AutoGen_783019 Regular Member Joined: 4/28/2015 Last visit: 11/23/2023 Posts: 10 Rating: (0)	Sorry to sound simple but I can create the project with the connections to the logo in Tia Portal load the completed project onto the end users PC and were all good? Regards Darren

Suggestion To thank Quote Answer

2/13/2016 5:46 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/9/2023 Posts: 31592 Rating: (3928)	There is indeed the configuration software, for example, WinCC Advanced. Required, precisely in order to create a project. In order to then "play" the project, one needs the Runtime. In a Simatic HMI runtime is integrated. Will you let the project run on a PC, then you need the WinCC Runtime Advanced. In the project so to create the connection.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_783019

2/16/2016 10:33 AM	Rate (0)
AutoGen_783019 Regular Member Joined: 4/28/2015 Last visit: 11/23/2023 Posts: 10 Rating: (0)	Fantastic thanks for your help Regards Darren

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on