Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC screen navigation problem

Created by: Pravin from TAL at: 6/7/2009 8:35 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/7/2009 8:35 AM	Rate (0)
Pravin from TAL Posts: 2 Rating: (0)	I want to change my screens in WinCC using some PLC bit. But I couldn't do it. Also I heard that it requires some VBscript. As Iam beginner to Vb. Please give me the solution. Regards, Pravin Bhange TAL, Pune India
Pravin from TAL Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

6/8/2009 7:27 AM	Rate (0)
Niranjan Prasad Posts: 691 Rating: (37)	the Question is not clear. Are you trying to change some 4-5 screens with PLC bits without having WinCC Standard Pictures or You are trying to control the screens through the PLC Bits in the Standard Mode
Niranjan Prasad Posts: 691 Rating: (37)
Suggestion To thank Quote Answer

6/8/2009 7:54 AM	Rate (0)
Saravana kumar Gold Member Joined: 2/6/2009 Last visit: 1/7/2025 Posts: 939 Rating: (118)	Hi, Open any one of the screen for example. Right click => Propertics => Miscellaneous => Select Display as NO => Right click Display => select Dynamic Dialog => Seelct the Tag Bit by which you want to make that Graphics to be appered, Do the same for the all screens. Please find the attachment for your reference. Attachment Graphics Designer.zip (106 Downloads)
	_______________________________________________________________ Best Regards T.Saravana Kumar "All for the Best"
Suggestion To thank Quote Answer

6/8/2009 1:29 PM	Rate (0)
Pravin from TAL Posts: 2 Rating: (0)	Thank you Sarvanan for sending me valuable information. I will check it by practically doing this. Regards, Pravin Bhange
Pravin from TAL Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on