Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC Simatic Logon via fingerprint reader

Created by: probyx at: 10/22/2008 9:37 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/22/2008 9:37 AM	Rate (0)
probyx Posts: 2 Rating: (0)	Is it possible to use fingerprint reader (eg. Microsoft Fingerprint Reader) to login to WinCC? Software in question is WinCC 7.0 and Simatic Logon 1.4 SP1. Thanks.
probyx Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

10/22/2008 10:31 AM	Rate (0)
Khaled_Ezzat Silver Member Joined: 9/7/2007 Last visit: 10/9/2024 Posts: 550 Rating: (62)	Hi probyx Furtunately Siemens gives all the solution to customer . for your requestplease take a look for the Order No. : 9AE4100-4DM04
	Best Regards
Suggestion To thank Quote Answer

10/22/2008 11:02 AM	Rate (0)
probyx Posts: 2 Rating: (0)	Thanks Khaled. I've seen that one before. I doubt it's price could be compared with standard fingerprint readers. Not to mention that stand alone reader is much less prone to damage than reader placed on mouse used all the time.
probyx Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

10/23/2008 1:55 PM	Rate (0)
JMJ Posts: 487 Rating: (45)	I am not sure standard fingerprint reader from market will be easy to use on WinCC server or client but it works very well with Web Navigator client.
JMJ Posts: 487 Rating: (45)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on