Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

wincc Sm @ rtClient

Created by: Fabius_vit at: 6/5/2016 4:17 PM (3 Replies)

Rating (0)

Thanks 2

4 Entries

6/5/2016 4:17 PM	Rate (0)
Fabius_vit Posts: 1 Rating: (0)	hi I would like to configure Sm @ rtClient, I have my own server, has anyone ever set up this system? I tried to load a project on the server, but nothing. thank you
Fabius_vit Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

6/7/2016 10:19 AM	Rate (0)
CastlerTroy Bronze Member Joined: 12/28/2015 Last visit: 11/2/2023 Posts: 256 Rating: (26)	Hello, which System (TIA or Classic) and WinCC Version you use?

Suggestion To thank Quote Answer

11/15/2016 11:50 AM	Rate (0)
LuWiack Experienced Member Joined: 12/2/2015 Last visit: 6/8/2023 Posts: 64 Rating: (5)	Hello, You must have installed Sm@rtServer on your own server, set password and - on second device Smart Client. Next you just connect to right IP address and it should works. I have tested it and hasn't any problems.

Suggestion To thank Quote Answer

11/15/2016 4:35 PM	Rate (0)
HugoD Posts: 439 Rating: (108)	Hello Fabius, Here is a procedure I give to my customer who want to try Sm@rtserver. Best regards, Hugo Attachment Procedure Smartserver comfort panel EN.pdf (123 Downloads)
HugoD Posts: 439 Rating: (108)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users greenyuk99 Alex's

|

Share this page:

Share this page on...

Follow us on