Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC Tia Portal - VB Script every 500ms

Created by: Lourdes at: 8/13/2013 10:41 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

8/13/2013 10:41 PM	Rate (0)
Lourdes Advanced Member Joined: 10/21/2011 Last visit: 11/20/2024 Posts: 29 Rating: (3)	I need some help!!! I'm new in WinCC Tia Portal Siemens product. I need to run a VB Script every 500ms. What are the steps? Thanks in advance. Lourdes
	Last edited by: CS Moderator at: 8/14/2013 3:00 PM new subject after splitting from /tf/WW/en/Posts/88544#top
Suggestion To thank Quote Answer

8/14/2013 2:12 AM	Rate (0)
Marcus Dias Posts: 13 Rating: (0)	Hey Lourdes. I don't know if this TIA PORTAL SIEMENS has any CLP or ladder programming interacting with the VB Scripts (cause I'm not familiar with it), but if yes, what I would do is to trigger the vb script upon a change of a tag, and by ladder programming, change this tag value each 500ms. Any doubts, please reply! :D
Marcus Dias Posts: 13 Rating: (0)	Last edited by: Marcus Dias at: 8/14/2013 8:36 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Lourdes

8/20/2013 10:27 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	New question splitted to GLOBAL SCRIPT facility given in WinCC is also available in TIA Portal v11 Professional? Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Prof System functions/Scripting

Follow us on