Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

wincc to siemens 575 vme plc

Created by: hooyahtommu56 at: 5/8/2009 4:24 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/8/2009 4:24 PM	Rate (0)
hooyahtommu56 Posts: 11 Rating: (0)	I have 5 Siemens (TI) 575 processors in a VME rack along with a DLAN card and a Radisys pc running QNX 2.0. and no spare slots Is there a way to connect a wincc touch panelor a pc running wincc run time to them all? Thanks Tom
hooyahtommu56 Posts: 11 Rating: (0)
Suggestion To thank

5/12/2009 7:58 AM	Rate (0)
Blue Moderator Platinum Member Joined: 4/21/2006 Last visit: 11/29/2024 Posts: 510 Rating: (24)	Closed: This thread is closed because it was posted twice. You can find the other question with answers here: siemens 575 plc / wincc.

Suggestion To thank

|

Share this page:

Share this page on...

Follow us on