Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC to TIA again for WinCC

Created by: rdoliveira at: 4/3/2013 5:13 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

4/3/2013 5:13 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 1/24/2025 Posts: 1592 Rating: (173)	I have a project done with "WinCCFlexible 2008 SP3 MP377 12"", altered to work with" TIA V11 SP2 Update 5 MP377 12 "" I can go back to version "WinCCFlexible 2008 SP3 MP377 12" "?
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

4/4/2013 7:04 AM	Rate (0)
Nelliyan randy Posts: 461 Rating: (29)	Hi , I never did this, still by means of resetting the HMI to factory setting u can download ur wincc flexibe code. the following link shows the procedure to reset HMI to factory https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&objid=35677293&caller=view Hope it helps Regards, Nelliyan.G
Nelliyan randy Posts: 461 Rating: (29)
Suggestion To thank Quote Answer

4/4/2013 10:32 AM	Rate (0)
TomDeWou Platinum Member Joined: 11/15/2006 Last visit: 1/20/2025 Posts: 1319 Rating: (176)	A project migrated to V11 and edited with it can no more be opened in WinCC Flexible 2008. But therefore, a new project for v11 is beeing created on migration and your 2008 project is kept untouched. So you still have your 2008 project. The panel itself can be still used by OS Update (back to older version), but your changes done to the project in V11 are lost.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users rdoliveira

4/4/2013 1:08 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 1/24/2025 Posts: 1592 Rating: (173)	OK, thanks for the information.
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on