Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC transfer problem

Created by: dzwilu at: 12/15/2008 1:58 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/15/2008 1:58 PM	Rate (0)
dzwilu Bronze Member Joined: 12/3/2008 Last visit: 3/22/2022 Posts: 146 Rating: (4)	Something weird happens to my WinCC. After some number(random) of transfers of my programm, the compiler stops working, but it doesn't signalize any fault or warning. Just the transfer window vanishes. And there is nothing I can do, restarting PC, WinCC, Step doesn't help. I need to open a new project and copy everything, what takes lots of time... Anyone knows whats wrong?? Greetings, dzwilu

Suggestion To thank Quote Answer

12/16/2008 10:28 AM	Rate (0)
Yai Posts: 62 Rating: (2)	hi dzwilu, Which version of WinCC you are using? if it's below than V6.2, I would recommend to turn off Firewall of target PC and run file Reset_WinCC.vbs, before transfering. it is because of that sometimes there are still some files relevant to WinCC running, so such files cannot be copied. the refered file is located in folder "bin" in WinCC installed path Yai
Yai Posts: 62 Rating: (2)
Suggestion To thank Quote Answer

12/19/2008 9:04 AM	Rate (0)
dzwilu Bronze Member Joined: 12/3/2008 Last visit: 3/22/2022 Posts: 146 Rating: (4)	I'll try to fix it that way, hope it's gonna help :) Thanks Greetings, Dzwilu

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on