2/1/2023 8:58 AM | |
Joined: 7/19/2022 Last visit: 4/17/2024 Posts: 356 Rating: (60) |
Hi blyshchak, I think that WinCC Unified can only use the OPC UA Data Access. Take a look at the manual: SIMATIC HMI WinCC Unified Engineering V17 |
Last edited by: JBS98 at: 02/01/2023 08:59:59If this Information really helps, you could use the Rate function |
|
2/1/2023 10:56 AM | |
Joined: 12/23/2019 Last visit: 3/28/2024 Posts: 21 Rating: (1) |
thanks so much! I see that OPC DA is not supported! |