WinCC UNIFIED V19: Availability of Trend Companion Tool on Comfort Panel

Hello,

I am programming a TP2200 Comfort panel with WinCC Unified V19. On my screen, I display the trends of several PLC tags for the last hour, and I must also display the minimum, maximum and average value of those tags during that time.

I found in the WinCC documentation the tool "Trend Companion", which seems like it automatically display all that and more.

However, the tool does not appears in the toolbox in my project. I suspect the tool may be unavailable on TP2200, but I found no information so far about what system can or cannot use it.

Doss anyone knows if the "Trend Companion" tool can be used on a Comfort panels, and if so, how to access it?

If not, is there another tool available to the TP2200 that can realize the same function?

in V19 it is available, in V18 it was not.

screenshot taken V19 Upd2

be careful that the minimum and maximum are only "calculated" on what is displayed, not the raw data.

There is some compression and smoothing, this means quick variations are missed in the trend control.

Thanks for the reply!

Checking the picture, it seems the panel used is a MTP2200. Checking on my own version of WinCC, it is present as well, so that is reassuring.

However, on a TP2200 the toolbox is different, see attached picture. They are two different products, so I'm assuming trying to load the program of one into the other is not really feasible?