Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

wincc user archive table print job

Created by: saseryu at: 5/21/2007 5:18 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/21/2007 5:18 PM	Rate (0)
saseryu Experienced Member Joined: 5/17/2007 Last visit: 9/15/2023 Posts: 39 Rating: (0)	Hello i have a problem with user archive table printing. when i want to print only visible column on the table, all the data in the user archive is printing. i choose the check box (print only the column in the visible area of the table) but still all the daha is printing. what should i do for print only visible area or wanted column. Best Regards, Attachment report.JPG (108 Downloads)

Suggestion To thank Quote Answer

5/22/2007 12:46 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	HI which WinCC / UserArchiveversion are you using? nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

5/22/2007 3:03 PM	Rate (0)
saseryu Experienced Member Joined: 5/17/2007 Last visit: 9/15/2023 Posts: 39 Rating: (0)	Hi , the version is Wincc 6.0 SP4

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on