Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC V12 Prof Tag acquisition cycle

Created by: Nikzitronik at: 3/7/2014 8:19 PM (3 Replies)

Rating (1)

Thanks 1

4 Entries

3/7/2014 8:19 PM	Rate (0)
Nikzitronik Posts: 150 Rating: (17)	Hello, It is my first project in WinCC V12 Professional and I am having some trouble with the aquisition cycle of the tags. I need to set the acquisition cycle of a tag related to an animation to a lower value than the default and I cannot find where this is done. In WinCC V7 it was easy. Regards Nik
Nikzitronik Posts: 150 Rating: (17)
Suggestion To thank Quote Answer

3/8/2014 11:26 AM	Rate (0)
adrian_botez Bronze Member Joined: 2/19/2013 Last visit: 9/26/2023 Posts: 184 Rating: (8)	You have to go to the HMI Variable, search for yours and you will see that at the end you have the option that you are looking for.

Suggestion To thank Quote Answer

3/12/2014 2:07 PM	Rate (1)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 7/29/2023 Posts: 914 Rating: (40)	Dear friend, See attached, I hope it may help. Have luck Tomy Attachment Acquisition.GIF (594 Downloads)
	Aim Higher
Suggestion To thank Quote Answer

3/12/2014 2:43 PM	Rate (0)
Nikzitronik Posts: 150 Rating: (17)	Dear Tomy, As stated my edition of WinCC is Professional where there is not such setting as described in the screenshots. I found that Acquisition cycle can only be set in the screen properties and at the trigger of a VB Script. Regards
Nikzitronik Posts: 150 Rating: (17)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users goudarzi91

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on