Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC v6.0 SP4 to V7.0 Upgrade issue!

Created by: DesignTech at: 2/6/2009 9:12 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/6/2009 9:12 AM	Rate (0)
DesignTech Experienced Member Joined: 9/6/2008 Last visit: 11/1/2024 Posts: 177 Rating: (2)	Hi All We are busy upgrading a 15x S5 155U, 2xServer/Redundancy Pair and 10 Clients system within Step7 v5.4 environment from WinCC v6.0 SP4 to v7.0 using PMC Driver v7.0. All appears fine except we seem to have a redundancy issue in the project. When I open WinCC from within Step7 and I select Redundancy and Open I get a ERROR LOADING CONFIGURATION DATA message and I cannot enter. Also when selecting Server Data and configuring I seem to have lost the Redundant Server to select as preferred server. Deleting the server data and reloading does not help. Any ideas. Philip

Suggestion To thank Quote Answer

2/16/2009 12:09 PM	Rate (0)
cumulus Platinum Member Joined: 9/27/2007 Last visit: 12/18/2020 Posts: 993 Rating: (102)	Hi, I think in this case the best is to contact the WinCC Hotline using Support request
	Learn more about visualization - visit the HMI courses of Siemens AG! siemens.com/sitrain Basic course WinCC (TIA Portal) machine-based https://support.industry.siemens.com/cs/ww/en/view/109758624 Advanced course WinCC (TIA Portal) machine-based https://support.industry.siemens.com/cs/ww/en/view/109758626 Basic course WinCC Professional https://support.industry.siemens.com/cs/ww/en/view/109758618 Basic course SiVArc (Auto. Generation of HMIs) https://support.industry.siemens.com/cs/ww/en/view/109758628 Basic course Energy Suite https://support.industry.siemens.com/cs/ww/en/view/109755577
Suggestion To thank Quote Answer

3/2/2009 8:25 PM	Rate (0)
gre_m Posts: 947 Rating: (45)	wincc 7.0 is very slow. better work with wincc 6.0 sp4
gre_m Posts: 947 Rating: (45)
Suggestion To thank Quote Answer

3/3/2009 3:18 PM	Rate (0)
Danielle Posts: 1275 Rating: (123)	Hi, We have stations with v7, running in customers' sites and for development, and we don't find it slow at all... Of course for using newer versions you should always check the hardware recommendations, 'cause they demand more resources. Best regards, Danielle
Danielle Posts: 1275 Rating: (123)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on