Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC v6.2 UA-export file name problem

Created by: cisem at: 11/28/2007 10:16 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

11/28/2007 10:16 AM	Rate (0)
cisem Posts: 10 Rating: (0)	Hi. İ have a problem about WinCC UA.export i want use a tag for export-file name. is it posible? uaArchiveExport(hArchive1,"C:\\file name.csv",0,0) can you give me an example please thanks for everythink
cisem Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

11/29/2007 11:19 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, see the FAQ http://support.automation.siemens.com/WW/view/en/22811841 April
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

11/30/2007 9:56 AM	Rate (0)
cisem Posts: 10 Rating: (0)	thanks but there is not anyhelpful for my problem. i wrote an examplebelow ............uaArchiveExport(hArchive1,"C:\\file name.csv",0,0) ......... SetTagChar(tagname,C:\\file name.csv) uaArchiveExport(hArchive1,tagname,0,0) but it doesnt work.i cant use taginstead of destination file path why? and how can solve this.
cisem Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

11/30/2007 1:05 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, basic C Knowledge char pch ; pch = GetTagChar*("Archive_FileName"); //wincc tag "Archive_FileName" contains the full path if (pch == NULL){ uaArchiveExport(hArchive1,pch,0,0) } Do
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

12/5/2007 12:40 PM	Rate (0)
cisem Posts: 10 Rating: (0)	Thank you,
cisem Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on