Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC V6 SP4 With AntiVirus

Created by: Jamer at: 5/4/2009 1:28 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/4/2009 1:28 PM	Rate (0)
Jamer Posts: 36 Rating: (3)	Hello I need to install a working anti virus on servers and clients with WinCC V6 SP4. I have seen the faq: https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&objid=24122009&caller=view But I can't buy anymore the versions on this Faq. Does anyone have any experience on any anti virus I can buy nowadays? Thanks
Jamer Posts: 36 Rating: (3)	Last edited by: Jamer at: 5/4/2009 1:29 PM
Suggestion To thank Quote Answer

5/4/2009 1:59 PM	Rate (0)
jaromir Bronze Member Joined: 3/6/2008 Last visit: 2/5/2021 Posts: 139 Rating: (18)	I use the AVG without problems Jaromir
	Jaromir Hladik DEL a.s. Strojirenska 38 591 01 Zdar nad Sazavou http:\\www.del.cz
Suggestion To thank Quote Answer

7/6/2010 9:51 AM	Rate (0)
capajos Posts: 1 Rating: (0)	I use Kaspersky. If want a good anti-virus, I suggest you rely on this one. I had no problem with it since I have installed it.
capajos Posts: 1 Rating: (0)	Last edited by: O_Moderator at: 7/6/2010 9:57 AM
Suggestion To thank Quote Answer

7/6/2010 10:32 AM	Rate (0)
Hulzhex Gold Member Joined: 8/25/2005 Last visit: 8/24/2023 Posts: 1161 Rating: (110)	Hello Jamer, have you seen teh following entry from the Product Support: With what are SIMATIC WinCC V7.x, V6.x and V5.x compatible? There a list with tested AntiVirus Software is published. Hope you will find one of them. Good luck Sabine
	Last edited by: Hulzhex at: 7/6/2010 10:54 AM ok this is not a new discussion
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on