Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC with Windows 2000

Created by: Import-User-1 at: 9/6/2005 11:57 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/6/2005 11:57 AM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	Hello! I've installed WinCC 5.0 + SP2 in demo mode on Microsoft Windows 2000 with SP2. All installations instructions was successfully completed.When i am starting Graphic Designer from Control Center only it's main window is showing, but the program is not responding. This problem also equeres with Microsoft Windows 2000+only SP1 on different PC configurations, for example, on Intel Pentium 3-933Mhz/128Mb Ram/20Gb HDD; on AMD Athlon 850Mhz/256Mb Ram/40 Gb HDD. Thanks for your help.
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

9/6/2005 11:58 AM	Rate (0)
Import-User-2 Silver Member Joined: 8/10/2005 Last visit: 4/9/2024 Posts: 1486 Rating: (32)	Dear Sir, please have a look to the following FAQ-Link. http://support.automation.siemens.com/WW/view/en/8734974 best regards your technical support
	Last edited by: O_Moderator at: 12/14/2010 2:20 PM link edited
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on