Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WINCC6.2 REDUNDANT COMMINICATION WITH H SYSTEM

Created by: aru at: 12/25/2008 9:50 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/25/2008 9:50 AM	Rate (0)
aru Advanced Member Joined: 2/26/2007 Last visit: 11/22/2023 Posts: 16 Rating: (1)	Dear Friends I am using Simatic Wincc6.2 which communicating to S7-400H system through IE general.I am not using CP1613 for Wincc communication. Is it possible to achieve wincc redundancy without CP1613? I am not able to configure two IE General in Hardware configuration of PC station. Here I have attached my system configuration for your reference. Thanks & Regards, Aru Attachment H-SYSTEM WITH WINCC6.2.pdf (108 Downloads)

Suggestion To thank Quote Answer

12/25/2008 11:25 AM	Rate (0)
gbs Posts: 178 Rating: (5)	Aru, It depends on what version of RedConnect you have. S7-RedConnect V1.3 - CP 1413 or CP5412(A2) S7-RedConnect V1.4 - Only CP 1613 Hope this helps.
gbs Posts: 178 Rating: (5)
Suggestion To thank Quote Answer

12/26/2008 1:10 PM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 11/6/2023 Posts: 2957 Rating: (242)	Hello, I agree with gbs. We have done system like this and used CP1613. IE general does not work with Redconnect as I remember.
	Best regards, Darius
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on