Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WINCCflexible 05 to S7400

Created by: Adam.bur3s at: 6/10/2009 9:48 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/10/2009 9:48 AM	Rate (0)
Adam.bur3s Posts: 8 Rating: (0)	Dear all masters.. I tried to connected to S7400 via ethernet by WinccFlexible 2005 (not advamce version). project already created with some tags and connection i made directly by put in ip number of my laptop and CP destination. but i can't see any data exchange at all., why? thanks
Adam.bur3s Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

6/10/2009 11:51 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 7/12/2023 Posts: 10221 Rating: (1177)	Hello Adam, Perhaps this FAQ could helps: How do you configure a connection between WinCC flexible Runtime (PC or Panel) and a SIMATIC S7-300 / S7-400 via Industrial Ethernet? Regards Hristo Mihalev

Suggestion To thank Quote Answer

6/11/2009 6:26 AM	Rate (0)
Adam.bur3s Posts: 8 Rating: (0)	thanks.. maybe i put my thread on wrong forum..sorry
Adam.bur3s Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on