Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Window size (and position) at startup

Created by: markiii at: 6/4/2009 11:34 AM (18 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

19 Entries

Entries per page: 10 | all

6/4/2009 11:34 AM	Rate (0)
markiii Posts: 33 Rating: (0)	Hi all, My Start Picture is a Picture of 1680x1050 pixels, defined in Graphics Designer as follow: Properties > Picture Object > Geometry > Picture Width = 1680 and Picture Height = 1050 This Picture contains several Picture Windows to split the screen. Wenn I start the runtime, the window does not have the size of 1680x1050, it can be bigger or smaller, depending on the last runtime session (because I started runtime without turning out the resize option on my first tests). How can I force WinCC to give the right size (the size of the Start Picture) when runtime starts ? The Computer Properties > Graphics Runtime is set as follow: Windows Attributes: -Title -Border -Status Bar Turn Off -Resize Cheers, Marc
markiii Posts: 33 Rating: (0)	Last edited by: markiii at: 6/4/2009 11:38 AM
Suggestion To thank Quote Answer

6/4/2009 11:45 AM	Rate (0)
rit03 Silver Member Joined: 6/13/2006 Last visit: 2/11/2023 Posts: 341 Rating: (24)	markiii Hi all, My Start Picture is a Picture of 1680x1050 pixels, defined in Graphics Designer as follow: Properties > Picture Object > Geometry > Picture Width = 1680 and Picture Height = 1050 This Picture contains several Picture Windows to split the screen. Wenn I start the runtime, the window does not have the size of 1680x1050, it can be bigger or smaller, depending on the last runtime session (because I started runtime without turning out the resize option on my first tests). How can I force WinCC to give the right size (the size of the Start Picture) when runtime starts ? The Computer Properties > Graphics Runtime is set as follow: Windows Attributes: -Title -Border -Status Bar Turn Off -Resize Cheers, Marc Select Computer Properties >Window Attribute - Adapt Picture as well regards, rit03

Suggestion To thank Quote Answer

6/4/2009 12:10 PM	Rate (0)
markiii Posts: 33 Rating: (0)	Well, thank you but it is not working
markiii Posts: 33 Rating: (0)
Suggestion To thank Quote Answer

6/4/2009 12:18 PM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 11/5/2024 Posts: 2957 Rating: (242)	Hello, What about full screen option ? Is it still not size you want ?
	Best regards, Darius
Suggestion To thank Quote Answer

6/4/2009 12:23 PM	Rate (0)
markiii Posts: 33 Rating: (0)	hmm no, I do not wish to use the fullscreen option now. I have got a 1920x1200 pixels screen and design my project for smaller screen, so a not rezisable window suit me better ;)
markiii Posts: 33 Rating: (0)
Suggestion To thank Quote Answer

6/4/2009 12:49 PM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 11/5/2024 Posts: 2957 Rating: (242)	Then "Window Attributes" -> Title "ON", Maximize "On" and if you don't want to change size of window, "Turn off" -> Resize "ON", Mazimize "ON". After this even if you press maximize button it will be the same size, but not moveable. Try it.
	Best regards, Darius
Suggestion To thank Quote Answer

6/4/2009 12:50 PM	Rate (0)
rit03 Silver Member Joined: 6/13/2006 Last visit: 2/11/2023 Posts: 341 Rating: (24)	markiii hmm no, I do not wish to use the fullscreen option now. I have got a 1920x1200 pixels screen and design my project for smaller screen, so a not rezisable window suit me better ;) It is beacuse the screen pagemay contain active-x or customize object which sometime doest not adap it size according to picture resolution. regards, rit03

Suggestion To thank Quote Answer

6/4/2009 1:08 PM	Rate (0)
markiii Posts: 33 Rating: (0)	Darius Then "Window Attributes" -> Title "ON", Maximize "On" and if you don't want to change size of window, "Turn off" -> Resize "ON", Mazimize "ON". After this even if you press maximize button it will be the same size, but not moveable. Try it. Mazimized or not I still can move the window AND the window has still not the right size (still smaller as 1680x1050 defined as a Start Picture)
markiii Posts: 33 Rating: (0)
Suggestion To thank Quote Answer

6/4/2009 1:11 PM	Rate (0)
markiii Posts: 33 Rating: (0)	rit03 It is beacuse the screen pagemay contain active-x or customize object which sometime doest not adap it size according to picture resolution. I think you are off topic... I am only speaking about the window size when runtime starts. I am not (yet) talking about the objects on a picture. Thanks anyway ^^
markiii Posts: 33 Rating: (0)	Last edited by: markiii at: 6/4/2009 1:17 PM
Suggestion To thank Quote Answer

6/4/2009 1:27 PM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 11/5/2024 Posts: 2957 Rating: (242)	Hi, markiii Darius wrote: Then "Window Attributes" -> Title "ON", Maximize "On" and if you don't want to change size of window, "Turn off" -> Resize "ON", Mazimize "ON". After this even if you press maximize button it will be the same size, but not moveable. Try it. Mazimized or not I still can move the window AND the window has still not the right size (still smaller as 1680x1050 defined as a Start Picture) Then I don't know what is wrong. I just create new application with one small window (smaller than screen size), set options I told you and everything is ok. Window is fixed size (the size set in windows properties), but its moveable until I press maximize. Than it bacames unmoveable, but the same size. I'm out of ideas here.
	Best regards, Darius
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users markiii

|

Share this page:

Share this page on...

Follow us on