Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Wireless digital & analoge I/O for LOGO!

Created by: Ayoob.M at: 6/4/2010 8:03 AM (4 Replies)

Rating (2)

Thanks 2

5 Entries

6/4/2010 8:03 AM	Rate (0)
Ayoob.M Posts: 13 Rating: (0)	Hello every body, I need to have wireless connection between a LOGO and the remote I/Os(switches, solenoids, pt,...), because the systems are needed to be moved so wires make big challenges, the distance is about 50 meters. what should i do in the both sides? what accessories are needed? what if i use wireless connection only for digital I/Os? i'd be so happy if someone share his experience,.
Ayoob.M Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

6/4/2010 9:31 AM	Rate (1)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 12/2/2024 Posts: 10229 Rating: (1181)	Hello, Unfortunately this kind of I/O modules for LOGO! didn't exist. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ayoob.M

6/4/2010 10:57 AM	Rate (1)
Andres [Str] Posts: 153 Rating: (17)	Hi,Ayoob.M It is possible to consider variants of the combined systems. - Wireless devices on baseEnOcean +gateway KNX/EnOcean+LOGO with CM (KNX/LOGO!) and the devices for KNX (power supply, KNX/USB ) - Wireless I/O actuators with LOGO. The signal comes from a sensor on actuator. Then with actuator on LOGO.
Andres [Str] Posts: 153 Rating: (17)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ayoob.M

6/5/2010 1:21 PM	Rate (0)
Ayoob.M Posts: 13 Rating: (0)	Hi andrey, thank's for idea,
Ayoob.M Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

6/5/2010 1:33 PM	Rate (0)
Ayoob.M Posts: 13 Rating: (0)	thank's for reply, your sincerely, Ayoob
Ayoob.M Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on