Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

wiring SM331 7KF02

Created by: RCroix at: 2/3/2012 3:01 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/3/2012 3:01 PM	Rate (0)
RCroix Posts: 1 Rating: (0)	H-H Just a simple question, I'm using a SM331 7KF02 as well, Channel 0,1 are configured for 4wires and al the others for 2wires, then I should bridge 10 and 11 right? Actually it's not wired like that, and I can see that is wrong... Thanks in advance rdlc
RCroix Posts: 1 Rating: (0)	Last edited by: O_Moderator at: 2/6/2012 11:53 AM new subject after splitting from /tf/WW/en/Posts/23526#top
Suggestion To thank Quote Answer

2/6/2012 3:18 PM	Rate (0)
Helios Posts: 27 Rating: (1)	Hello! I think you are right! Between 10 and 11 is a connection. look ate the doku (page 345): http://support.automation.siemens.com/WW/view/en/8859629 ..hope it help...
Helios Posts: 27 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on