Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

With PROFINET and plc s7-1200, how many servo drives can be controlled independently, and how many can be controlled with interpolation in both cases?

Created by: medo1998 at: 10/16/2023 12:26 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

10/16/2023 12:26 PM	Rate (0)
medo1998 Joined: 9/13/2023 Last visit: 10/18/2023 Posts: 35 Rating: (0)	With PROFINET and plc s7-1200, how many servo drives can be controlled independently, and how many can be controlled with interpolation in both cases?

Suggestion To thank

10/16/2023 12:28 PM	Rate (0)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 10/11/2024 Posts: 22410 Rating: (3017)	please stop to open a new topic to ervery question. follow the answers in the already opened topics

Suggestion To thank
This contribution was helpful to 1 thankful Users Jen_Moderator

10/17/2023 4:03 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	Closed cause question posted twice. The second thread with the subject How many servo drives can be controlled via PROFINET with an S7-1200 PLC? is published within the conference SIMATIC S7-1200. Best regards, Jen_Moderator

Suggestion To thank

|

Share this page:

Share this page on...

Follow us on