Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WP213 error Clock

Created by: SAR-CNT at: 3/26/2017 10:24 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/26/2017 10:24 AM	Rate (0)
SAR-CNT Silver Member Joined: 1/23/2013 Last visit: 8/10/2022 Posts: 226 Rating: (5)	Hi help me S7-1200+WP213 test programm FB231 WP231PR SIWATOOL V7 =no HMI =no I can not calibrate... Attachment wp231.png (149 Downloads)

Suggestion To thank Quote Answer

3/26/2017 11:27 AM	Rate (0)
SAR-CNT Silver Member Joined: 1/23/2013 Last visit: 8/10/2022 Posts: 226 Rating: (5)	Hi problem solved... But I can not again calibrate Attachment wp231=2.png (143 Downloads)
	Last edited by: SAR-CNT at: 3/26/2017 12:01:59 PM
Suggestion To thank Quote Answer

3/27/2017 11:48 AM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 9/28/2023 Posts: 1061 Rating: (157)	Hello SAR-CNT, I guess the digit value isn’t increasing enough in the WP231 module, if you put the calibration weight on the scale. The digit value has to increase at least of 40000 digits, if you put the calibration weight on the scale. If the digit values of the two calibration commands “Set Calibration Point 0” and “Set Calibration Point 1” are too close together, the WP231 module reject the “Set Calibration Point 1” command. Best regards Siwarexi

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on