Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WP231 Library Function For the New Firmware V 2.0.3

Created by: subin at: 1/8/2015 5:11 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

1/8/2015 5:11 PM	Rate (0)
subin Posts: 84 Rating: (18)	Sir, Is the new firmware can be used with the the WP231PR siemens function block? I see a major change that in new firmware we can set limits in both percentage or the absolute values. Is there any new library FB released for new firmware?
subin Posts: 84 Rating: (18)
Suggestion To thank Quote Answer

1/9/2015 9:43 AM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 9/22/2023 Posts: 1059 Rating: (157)	Hello subin, Yes, the new firmware V2.0.3 can be used with the existing WP231PR siemens function block. Therefore there exist no new library FB. The “limit reference” for the limit 1 and limit 2 can be used now in percentage or absolute values. This extension make an impact now to the address DB231.DBW802 of the DB “WP231PR_DB”: 0: Limit value 1 and limit value 2 are based on the gross value (in percentage) 1: Limit value 1 and limit value 2 are based on the net value (in percentage) 2: Limit value 1 and limit value 2 are based on the gross value (absolute value) NEW!!! 3: Limit value 1 and limit value 2 are based on the net value (absolute value) NEW!!! Best regards Siwarexi

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users subin

9/13/2017 7:53 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 9/22/2023 Posts: 7291 Rating: (143)	New question published by Ipanaque is split to a separate thread with the subject In Tia Portal only have the version of FW 1.0 - Can not do any testing, . Best regards Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on