Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WP231: tare is not working since scale value is -0.7kg

Created by: TebiPor at: 10/17/2022 7:09 PM (0 Replies)

Rating (0)

Thanks 0

1 Entries

10/17/2022 7:09 PM	Rate (0)
TebiPor Member Joined: 4/9/2021 Last visit: 9/23/2023 Posts: 3 Rating: (0)	Hi Siwarexi. I have a simila problem. Im usign a WP231 module and tare is not working since scale value is -0.7kg. It works fine with 1kg, 5kg, -0.2kg, etc. But I think I have troubles when the value is negative and moves away from zero. May be I am missing some parameters? As always, thanks. ------------------------------------------------------------------------------------------ Split from Siwarex TARE command is not working.
	Last edited by: Jen_Moderator at: 10/18/2022 08:57:49 New subject after splitting
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on