Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

"WP231PR (FB231),The block can only be compiled with a valid password"

Created by: msgsadek at: 4/20/2021 1:32 PM (17 Replies)

Rating (0)

Thanks 4

Result pages:: |; 1 | 2; |

18 Entries

Entries per page: 10 | all

4/22/2021 9:49 AM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 11/21/2023 Posts: 1071 Rating: (165)	Hello msgsadek, I guess your issue comes from the firmware version of your PLC. Can you post your TIA project, please? I would like to take a look into it. I need from your TIA project only your Device configuration and your FB231. If you want, you can delete the rest of your S7-program, except the FB231. Also your HMI visualisation isn’t important for me. Best regards Siwarexi

Suggestion To thank Quote Answer

4/23/2021 8:43 AM	Rate (0)
msgsadek Bronze Member Joined: 8/12/2016 Last visit: 11/28/2023 Posts: 100 Rating: (3)	I made an archive of the project so it is compressed now. The zipped file is about 8.3 MB and the allowed attachment file here is only 3 MB. How shall I sent the file for you?

Suggestion To thank Quote Answer

4/23/2021 9:27 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 11/28/2023 Posts: 7580 Rating: (154)	Hi msgsadek, you can upload your file over a filesharing hoster. After you published the link to the download, I will attach the file here Best regards, Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank Quote Answer

4/23/2021 10:24 AM	Rate (0)
msgsadek Bronze Member Joined: 8/12/2016 Last visit: 11/28/2023 Posts: 100 Rating: (3)	I sent you the project using wetransfer and provided the link with a message. Please check you messages.

Suggestion To thank Quote Answer

4/23/2021 12:02 PM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 11/28/2023 Posts: 7580 Rating: (154)	Hi msgsadek, I didn't receive a personal message from you Please post the link within the topic. Best regards, Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank Quote Answer

5/5/2021 12:42 PM	Rate (0)
msgsadek Bronze Member Joined: 8/12/2016 Last visit: 11/28/2023 Posts: 100 Rating: (3)	[snip] Attachment PLC_Peeler_20-04-2021-Compressed_20210423_0938.zip (392 Downloads)
	Last edited by: Jen_Moderator at: 05/06/2021 07:53:13 Removed link and added file as an attachment.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jen_Moderator

5/5/2021 2:17 PM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 11/21/2023 Posts: 1071 Rating: (165)	Hello msgsadek, Well, you use in your TIA project: - a PLC with the firmware V3.0 - the FB231 with the version V4.1 This combination doesn’t work! You have two possibilities: 1. possibility: For your older PLC with the firmware V3.0, you use the FB231 with the version V3.0 (= without Siwarex DB) 2. possibility: You use a PLC with the firmware V4.x. If so, you can use your FB231 with the version V4.1 (= with Siwarex DB) Best regards Siwarexi

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users msgsadek Uberprinny

5/6/2021 2:27 PM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 11/21/2023 Posts: 1071 Rating: (165)	Hello msgsadek, I have an issue with this thread! Is your issue solved now? I saw a new link in my personal messages, but in that TIA Portal project, I see again the PLC with FW V3 and the FB231 with the V4.1!?! Can you explain to me, if you still have an issue? Sorry, but I lost track of this thread! Best regards Siwarexi

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on