Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WP241 MASTER_TOTALIZER_S1 Not RUN.

Created by: Insogra at: 10/30/2020 12:45 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/30/2020 12:45 PM	Rate (0)
Insogra Member Joined: 2/17/2017 Last visit: 12/19/2023 Posts: 3 Rating: (0)	Hello, I have made an installation with several WP241 and some of them the s1 totalizer, it does not work. I see counting the totalizer s2, s3 ... s6 but the S1 does not. What is the reason? Best regards.

Suggestion To thank Quote Answer

11/2/2020 4:30 PM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 12/5/2024 Posts: 1153 Rating: (175)	Hello Insogra, Which firmware has your WP241 module? Best regards Siwarexi

Suggestion To thank Quote Answer

11/3/2020 4:03 PM	Rate (0)
Insogra Member Joined: 2/17/2017 Last visit: 12/19/2023 Posts: 3 Rating: (0)	Article Number: 7MH4960-4AA01 Hardware: 3 Firmware 1.2.1.

Suggestion To thank Quote Answer

11/4/2020 11:36 AM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 12/5/2024 Posts: 1153 Rating: (175)	Hello Insogra, Is the resolution for Totalizer 1 too high, so that you can’t see the increasing of the Totalizer 1? What is your resolution for Totalizer 1? Best regards Siwarexi

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on