Wp251 flowrate problem

Hello tony311,

The flow rate is the second to last parameter into the structure “DR31” of the Instance-DB of the WP251 module. It’s the parameter “RESERVED14”.

(OR: You can use into the structure “s_IO_DATA” the parameters “PROCESS_VAL_1” and  “PROCESS_VAL_1”.

  These parameters can be defined into the DR14 (e.g .with the flow rate). )

Best regards

Siwarexi

Hello tony311,

Both process values are working:
Process value 1 and Process value 2 for the flow rate.

What do you do exactly, so that you can’t set the value 24?

Best regards

Siwarexi

Hello tony311,

I mean, what did you do exactly in TIA Portal?

Best regards

Siwarexi