3/6/2009 6:59 AM | |
Joined: 3/21/2006 Last visit: 7/26/2024 Posts: 10228 Rating:
|
Hello You can look at manual COM PROFIBUS (from page 32). There have example how to enter parameter in ET200M slave, regards digital and analog cards. Hope this will helps. regards |
3/6/2009 3:42 PM | |
Joined: 3/21/2006 Last visit: 7/26/2024 Posts: 10228 Rating:
|
Hello So, let's continue with COM Profibus 3.3. regards |
3/13/2009 6:31 PM | |
Joined: 3/21/2006 Last visit: 7/26/2024 Posts: 10228 Rating:
|
Hello Would you try this way: Importing / reading COM PROFIBUS V.3.x files with COM PROFIBUS V5.0. regards |
Follow us on