Industry Online Support
Technical Forum
4/11/2011 9:00 AM | |
Posts: 241 Rating:
|
Safety Programming Package supplied by Siemens like S7 Distributed safety is TUV certified, if I use this software to develop my application, is should be normally safe right? then why the application developed by the safety programming tool need to be certified again? Splitted from F-Safe program - why should it be tested by the TUV after the development?. |
Last edited by: O_Moderator at: 4/12/2011 10:19 AMnew subject after splitting |
|
4/12/2011 8:49 AM | |
Posts: 241 Rating:
|
Dear dmertens, Very good and understandable reply. |
4/13/2011 12:27 PM | |
Posts: 241 Rating:
|
Dear dmertens, I am just wondering if such certification authority exist in India specially to test and verify the safety requirement of the safety PLC project. You have shared very good information and make me think little bit on this issue. Normally how you do that? To be exact after software developement what is the next steps, how to get certificate for developed Safety software for the Plant, if any change is made at site then obviously we have to re-certify the software again. It seems so time consuming process. Or do we need the Safety PLC programmer need be TUV or similar safety certified guy holding valid certificate from the authority. Wishing some more valuable comment from you.You have opened a new bay in the safety part of automation in India or may be it is already there -only I don't know where to find them. Any new info on this subject will be apriciated greatly. |
Follow us on