Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Why is MMC used for S7-400?

Created by: MrBin at: 5/31/2012 5:35 AM (3 Replies)

Rating (1)

Thanks 3

4 Entries

5/31/2012 5:35 AM	Rate (0)
MrBin Posts: 90 Rating: (0)	Hi everybody! how is MMC used? it have effect how for PLC s7-400. hope your helps!! best ragards!
MrBin Posts: 90 Rating: (0)
Suggestion To thank Quote Answer

5/31/2012 7:31 AM	Rate (0)
AMAZINGAHMED Gold Member Joined: 8/27/2006 Last visit: 10/22/2024 Posts: 719 Rating: (88)	MrBin Hi everybody! how is MMC used? it have effect how for PLC s7-400. hope your helps!! best ragards! Ayman Elotaify Just a very small correction of the above question. PCS7 & S7-400 have memory cards. MMC is for S7-300 only simply, You use the memory card to store your program
	The more you know, The more you know that you don't know
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users trunat

5/31/2012 7:54 AM	Rate (1)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Hello, Which memory cards can you use with a S7-300 CPU? How can I get an overview of the S7-400 memory concept? S7-400: What should you watch out for when slotting/removing a memory card (RAM)? How can you write the program to the FLASH Memory Card when using a SIMATIC S7-400 CPU? S7-400: Saving the user program to FLASH EPROM when the module is slotted in the CPU Just to start with. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users playerslight trunat

6/20/2012 4:33 PM	Rate (0)
MrBin Posts: 90 Rating: (0)	Thanks your advice!
MrBin Posts: 90 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on