Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S5 IM 308-c bus fault

Created by: AutoGen_381002 at: 8/26/2014 4:13 PM (12 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

8/30/2014 7:04 PM	Rate (0)
AutoGen_381002 Posts: 6 Rating: (0)	yesterday we insert repaired IM 308c following status show IM card RN LED ON BF LED Flashing we connected allow nodes with IM and all nodes up .no BF shown any node, but after reguler interval IM card FB LED flickering for few micro second and machine emergecy stoped and reset activated. Plz suggest me .................
AutoGen_381002 Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

8/31/2014 3:16 PM	Rate (0)
sps-concept Gold Member Joined: 4/5/2006 Last visit: 8/13/2023 Posts: 642 Rating: (131)	Hello, pakistan is too far away... Can you connect a PG/PC with COM-Profibus? Regards André Räppel --------------------------------------------------------------------------------- www.raeppel.de work faster withinnovative PLC-Tools

Suggestion To thank Quote Answer

10/30/2014 6:09 PM	Rate (0)
dendhondt Bronze Member Joined: 8/5/2009 Last visit: 7/4/2022 Posts: 156 Rating: (7)	Dit you really powered down the entire cpu Rack with the CPU and the IM308C or do you mean put it from run to stop ? Powered down long enough? I had problems before when i changed the comProfibus configuration after this i always have to power down/up the rack with the cpu, if i don't do this long enough the cpu cannot use the new adresses

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on