Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Correct use for contactor 3P 3RT

Created by: Urantia at: 4/1/2010 12:54 AM (3 Replies)

Rating (1)

Thanks 1

4 Entries

4/1/2010 12:54 AM	Rate (0)
Urantia Experienced Member Joined: 10/23/2009 Last visit: 10/3/2024 Posts: 115 Rating: (0)	Hi all, May clarify this question I have I have seen applications where pole contactor 3RT1016-1BB41, just connect two phases (L1, L2) and third stages did not connect. This is because that is the mark diagrams for certain applications. The question is: a) It is correct this way of using the contactor? b) what is the theoretical basis of your response? Thanks in advance.

Suggestion To thank Quote Answer

4/20/2010 4:50 PM	Rate (0)
RazzFazz Posts: 10 Rating: (0)	Hello Aslp, It would be very helpful to know the details and thedescription of your application. Please find attached the technical data of 3RT101 contactors. Best regards RazzFazz Attachment 3RT101 Data 2009.pdf (904 Downloads)
RazzFazz Posts: 10 Rating: (0)	Last edited by: RazzFazz at: 4/20/2010 4:52 PM
Suggestion To thank Quote Answer

6/1/2010 11:15 AM	Rate (1)
srk Posts: 8 Rating: (1)	3RT101 can be used with only 2 poles connected and the third pole without any connection. The problem arises if you use any device that evaluates all the 3 poles together (like a 3RU or 3RB)
srk Posts: 8 Rating: (1)
Suggestion To thank Quote Answer

6/1/2010 5:46 PM	Rate (0)
Urantia Experienced Member Joined: 10/23/2009 Last visit: 10/3/2024 Posts: 115 Rating: (0)	Thanks a lot, My question is solved Greetings!

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users UMENCHO

|

Share this page:

Share this page on...

Follow us on