Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Where & how to connect SMC card reader?

Created by: PISCEAN 2010 at: 7/21/2010 10:43 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/21/2010 10:43 AM	Rate (0)
PISCEAN 2010 Diamond Member Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (878)	Hello, We have got programming device SIMATIC field PG M2 MLFB no 6ES7713-1BB10-0AD4. Along with it, SMC card reader MLFB 6ES7790-2AA00-0AA0 is also received. On the instrunction leaflate of card, it is printed as "The card reader is intended for use in Express card slot only." On field PG, the express card & PC card slot is to the right side & widthwise it is bigger than the width size of card reader. In getting started manual, which is received along with PG, their is information available about the micro memory card interface, memory card interface. Now as all those interfaces are available on PG, I am little bit confused about these different slots/interfaces. My question is what is the use of this supplied SMC card reader?, why those different slots/interfaces are provided on PG? Where from I can get the detailed technical information/user manual of the said PG? Thanks in advance. DEEP.

Suggestion To thank Quote Answer

7/21/2010 11:54 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (482)	Hello Deep... I have some informations on this....check out this links: Field PG operating instructions http://support.automation.siemens.com/WW/view/en/27002273 Simatic Memory Card(SMC) information http://support.automation.siemens.com/WW/view/en/38627741 http://support.automation.siemens.com/WW/view/en/38572895 Rgds,
Ekalavya Posts: 2964 Rating: (482)
Suggestion To thank Quote Answer

7/21/2010 12:56 PM	Rate (0)
PISCEAN 2010 Diamond Member Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (878)	Hello Ekalavya, Thank you very much for your reply. I have gone thru the said documents, but I didn't get the information which I wanted. No any information about SMC inetrface is provided in those documents. So I posted this thread with the hope that,may be some one has used & may have practical exprience. Regards, DEEP.

Suggestion To thank Quote Answer

7/22/2010 6:30 AM	Rate (0)
PISCEAN 2010 Diamond Member Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (878)	DEEPSTR2010 Hello, We have got programming device SIMATIC field PG M2 MLFB no 6ES7713-1BB10-0AD4. Along with it, SMC card reader MLFB 6ES7790-2AA00-0AA0 is also received. On the instrunction leaflate of card, it is printed as "The card reader is intended for use in Express card slot only." On field PG, the express card & PC card slot is to the right side & widthwise it is bigger than the width size of card reader. In getting started manual, which is received along with PG, their is information available about the micro memory card interface, memory card interface. Now as all those interfaces are available on PG, I am little bit confused about these different slots/interfaces. My question is what is the use of this supplied SMC card reader?, why those different slots/interfaces are provided on PG? Where from I can get the detailed technical information/user manual of the said PG? Thanks in advance. DEEP. Hello Experts, Can any one help me? DEEP.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on