Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Lost my License

Created by: layudhi at: 3/27/2012 4:09 PM (2 Replies)

Rating (1)

Thanks 3

3 Entries

3/27/2012 4:09 PM	Rate (0)
layudhi Posts: 60 Rating: (1)	Hi All, I have problem with my PG M3. The problem related to the software (or the windows i uguest) An error message keep showing up on windows welcome screen every time i started the windows it said "Cryptographic provider initialization failed (plugin SCP3 - 0x80090016)" I don't know, if it a coincident or not. My Simatic manager failed to open since then. The error message is No Valid License Found. I Check it with Automation Manager, no license found for my Simatic Manager Can anybody tell me, what happen with my PG M3 ? and how to recover my License ? regards Yudhi Attachment error.jpg (364 Downloads)
layudhi Posts: 60 Rating: (1)
Suggestion To thank Quote Answer

3/27/2012 6:21 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Hello, Basically using How can you recover defective licenses and authorizations? is the way to repair license keys. But in your case I think the problem is in ALM like a software itself. Did you try to reinstall it? Or is it possible to start ALM in order to see the licenses there? Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

3/31/2012 7:19 AM	Rate (1)
layudhi Posts: 60 Rating: (1)	Ok, solved I used Siemens support request The problem on the Windows cryptography service, because of too many machine Key. After deleting all machine key older than 2 days, All my Simatic license is visible again Regards, layudhi
layudhi Posts: 60 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users UMENCHO O_Moderator Lucky7

|

Share this page:

Share this page on...

Follow us on