Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

configurate a Panel PC like a Scada Visualizator

Created by: dillagos at: 5/21/2012 5:22 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/21/2012 5:22 PM	Rate (0)
dillagos Posts: 4 Rating: (0)	Greetings , My problem now is with TIA Portal, me and my teacher are looking for configurate a Panel PC like a Scada Visualizator, but when we put the Panel PC and we go to edit the visualization, it doesn't appear(appears a pc panel with ethernet connections...), and if we go to configurate an HMI device, it appears!!(the images.. of wincc) What's the problem? Thanks for all your help. Kind regards. Alex
dillagos Posts: 4 Rating: (0)	Last edited by: O_Moderator at: 5/23/2012 8:33 AM new subject after splitting from /tf/WW/en/Posts/74740#top
Suggestion To thank Quote Answer

5/23/2012 10:13 AM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Can you post a screenshot from your behaviour? Which Version of WinCC V11 do you use? Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on