Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

I want replicate starter project on new machines

Created by: Giorgiodn at: 8/19/2013 10:55 PM (12 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

8/22/2013 4:40 PM	Rate (0)
Giorgiodn Posts: 6 Rating: (0)	I think my colleague on octoberdid update to 4.5, but no notes on my bkup .. Now... I think my colleague update a this version 4.5 HF 2. Then, when i copy CF i do it right way to update and this is the answer ar topic. Last question. But, which file (on CF ) have the indication of version, or parameter on starter?
Giorgiodn Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

8/22/2013 4:55 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/14/2024 Posts: 22452 Rating: (3030)	Hello, normally the file content.txt in the root of the CF Card list the Versions on the Card. On the CU you can read the FW Version in Parameter p18. Regards Christoph

Suggestion To thank Quote Answer

11/11/2013 9:10 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	New question splitted to upgrade the firmware version on CF card from V.4.4 to V4.6 Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on