Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

wincc unified simulation problem

Created by: red red at: 4/18/2022 9:21 PM (15 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

4/20/2022 11:56 AM	Rate (0)
red red Advanced Member Joined: 8/22/2008 Last visit: 10/16/2024 Posts: 12 Rating: (0)	It gives the same error regardless the which project is loaded. Windows IIS features are correct. Please check below the error message catched from traceviewer.

Suggestion To thank Quote Answer

4/25/2022 12:56 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 11/18/2024 Posts: 1561 Rating: (169)	Hello, take a look at this LINK, it may be some license that is missing. good luck
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

4/27/2022 3:15 PM	Rate (0)
FlavienGNS Advanced Member Joined: 8/25/2021 Last visit: 8/23/2023 Posts: 11 Rating: (0)	have you already load a user ? if not before you load, there an option to untick in the runtime something about managing the users in the runtime

Suggestion To thank Quote Answer

5/2/2022 1:53 PM	Rate (0)
red red Advanced Member Joined: 8/22/2008 Last visit: 10/16/2024 Posts: 12 Rating: (0)	Hi, I have loaded the user with HMİ admin rights. Unchecked the setting to be able to use local users. receiving the message below now.

Suggestion To thank Quote Answer

5/2/2022 3:55 PM	Rate (0)
FlavienGNS Advanced Member Joined: 8/25/2021 Last visit: 8/23/2023 Posts: 11 Rating: (0)	Hi, Well i don't have ideas anymore. is it the same with every project you have created or only this one ? Regards, Flavien

Suggestion To thank Quote Answer

5/5/2022 2:11 PM	Rate (0)
AutoGen_5326812 Member Joined: 11/18/2021 Last visit: 10/9/2024 Posts: 4 Rating: (0)	Has anyone found a solution for the problem? It seems that I have the same problem. I have installed TIA Portal V17 with update 3 for one PC and I keep getting the message "No Connection to server" but there ist no problem in getting acces to the user managment. The settings and permissions are exactly the same as on the PC with V17 Update 1. The problem exists with old projects as well as when I create a new one. With Traceviewer I can't find any problem. The only difference is still in the Windows versions. Update 1 is installed on Windows 10 20H2 and Update 3 on Windows 10 21H2.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on