Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem with ProTool Runtime

Created by: Meritor at: 11/20/2005 10:50 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

11/20/2005 10:50 AM	Rate (0)
Meritor Posts: 33 Rating: (2)	Hello Everybody! I have a "small" problem with Protool Runtime (I have ProTool 6.0 SP2) When I create a project in ProTool and I want to go in Runtime the following problem accured: - Normally a small window appear in the middle of the screen where I can see the main window (what I configure in offfline) and the buttons!(And I can test the project normally together with the PLC simulator) But a couple weeks ago only the main window is appeared in the left-top side of the window without the buttons.And with this runtime I am not able to test my projects. I have already unistalled the proTool completly but unfortunatelly I have the same problem. Is it a windows problem? Sombody can help me regarding to this problem???? Thaks in Advance! Attachment Runtime.JPG (891 Downloads)
Meritor Posts: 33 Rating: (2)
Suggestion To thank Quote Answer

11/21/2005 9:13 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi Meritor, when you deinstalled Protool, did you erase the regkeys as mentioned in http://support.automation.siemens.com/WW/view/en/189025 Did you change any settings in your screen resolution? Regards, Nemo
Nemo Posts: 3149 Rating: (171)	Last edited by: Nemo at: 11/21/2005 12:24 PM
Suggestion To thank Quote Answer

11/21/2005 11:44 AM	Rate (0)
Meritor Posts: 33 Rating: (2)	Dear Nemo! I didn't make any change in the regkeys. Would you be so kind and send me the link again? I couldn't find any information regarding to the regkeys in this link! I use to change the resolution frequently but for the Pro Tool runtime I always use the same resolution (1680x1050). Anyway, It can be make any problem if I make any changes in the resolution? (Maybe I made a mistake once....)
Meritor Posts: 33 Rating: (2)
Suggestion To thank Quote Answer

11/21/2005 12:26 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi Meritor, sorry, gave you the wrong link... http://support.automation.siemens.com/WW/view/en/189025 Afterwards, you´ve to install STEP7 as well. Have you already tried to open your project on a different computer? Regards, Nemo
Nemo Posts: 3149 Rating: (171)	Last edited by: Nemo at: 11/21/2005 12:26 PM
Suggestion To thank Quote Answer

11/21/2005 1:40 PM	Rate (0)
Meritor Posts: 33 Rating: (2)	Hello! Thanks for the tipp but tell you the true I wanted to avoid to reinstall my STEP 7 completely because it takes at least 1 day to install all of the components on my PC and I am in the middle of the commissioning :-( Anyway thanks again!
Meritor Posts: 33 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on