9/3/2024 7:15 AM | |
Posts: 4 Rating:
|
I have a siemens module that controls the movement of a 2 axis transferrer. My problem is that i can not access the code that is controlling the axis. I think the module siemens product number is 6sn1123-1ab00-0ha1. Thank you in advance for the assistance. |
9/3/2024 11:03 AM | |
Joined: 10/17/2007 Last visit: 3/14/2025 Posts: 4245 Rating:
|
Please send picture of your WHOLE DRIVE 6sn1123-1ab00-0ha1. is only power section, I need to see the control card
|
Last edited by: nulizhang at: 09/03/2024 11:04:03If you like my comments please |
|
This contribution was helpful to
1 thankful Users |
9/5/2024 11:48 AM | |
Posts: 4 Rating:
|
|
Last edited by: Moderator_Lan at: 09/05/2024 17:24:38Images embedded Last edited by: Moderator_Lan at: 09/05/2024 17:25:27 |
|
9/5/2024 5:04 PM | |
Joined: 10/17/2007 Last visit: 3/14/2025 Posts: 4245 Rating:
|
From your this picture, i Know you have Siemens SINUMERIK 810D controlling you machine--maybe CNC machine. and you have on the left side of 810D unit one double axis drive control -I think it is SIMODRIVE 611U--you said it controlling your machine transfer Here is your question--" My problem is that i can not access the code that is controlling the axis" tell me what CODE you want to know -- #1--you want to know code from 611U drive? or #2- you want to know code from 810D cnc code? If #1-- You need read manual for SIMODRIVE 611U
|
Last edited by: nulizhang at: 09/05/2024 17:38:52If you like my comments please |
|
This contribution was helpful to
1 thankful Users |
9/6/2024 6:10 AM | |
Posts: 4 Rating:
|
Knowing the code for both would be helpful. The reason I want to view the code of this machine is the PLC cards that I attached a photogragh of to this post, as far as i know they are connected to this drive. I need to know what happens when this inputs are changing value. |
9/6/2024 6:00 PM | |
Joined: 10/17/2007 Last visit: 3/14/2025 Posts: 4245 Rating:
|
I don't think you need know both. and I see you are very new ! for Siemens automation, I suggest you learning SIMODRIVE 611U 1st. that will be easy for normally people. I attached manual , If you have difficulty and you MUST know the code . you can PM me, as here we are NOT training center --we only help free for people have basic ideas.
AttachmentFBU_0510_en.pdf (386 Downloads) |
If you like my comments please |
|
9/9/2024 5:33 AM | |
Posts: 4 Rating:
|
Alright, thank you for the assistance! |
Follow us on