I have a question. My TIA 19 don't have LOGO in connection driver. How do yo connect between LOGO and MTP400. Thank you for answer. 

------------------------------------------------------------------------------------------
Split from connect LOGO! to MTP400 Unified Basic.

Here's a simple example.

Using "Standard Modbus TCP/IP" communication driver.

TIA V19, LSC V8.4.1, LOGO! 8.4.

With a switch from the HMI changing the status of Q1.

The ZIP file is too large to attach.

So I upload it in my cloud, here's the link:

MTP400 V19