Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

View trends for 6 months

Created by: AutoGen_6983294 at: 4/28/2024 5:17 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/28/2024 5:17 AM	Rate (0)
AutoGen_6983294 Joined: 5/12/2023 Last visit: 5/20/2024 Posts: 4 Rating: (0)	I am using Simatic manager V9.1 and Wincc 7.5. I did long term archiving of PV out values of instruments and In Wincc I have also did setting in Tag logging > Archives > Tag logging Slow > and did the setting as per attached photo.. but it still showing trends of 7 days back only.. I did the setting according to 6 months.pls guide. I want trends to be shown for 6 months ------------------------------------------------------------------------------------------ Split from WinCC 7.3 projects - historic trends remain only for 7 days. Attachment IMG20240424091911.jpg (194 Downloads)
	Last edited by: Jen_Moderator at: 04/29/2024 09:40:56 New subject after splitting
Suggestion To thank Quote Answer

5/10/2024 10:00 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 10/31/2024 Posts: 14079 Rating: (1764)	Hello AutoGen_6983294 What do you mean with simatic manager V9.1? the newest Version is V5.7 -> Or do you use PCS7? Check in the startup list in WinCC if you have activated Taglogging Runtime. Where do youhave made the tests? by simulation or starting RT on the ES or by running on RT System? do you have loaded the changes to RT and do a Restart of the RT? Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

5/17/2024 12:40 PM	Rate (0)
AutoGen_6983294 Joined: 5/12/2023 Last visit: 5/20/2024 Posts: 4 Rating: (0)	Got the Answer. Incase if anyone needed the solution. Just change to Gigabytes below 6 months. for eg. 6 months and 40 Gigabytes

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on