Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

Developing protocol S7 TCP/IP with Timestamp based on Remote RTU

Created by: MHD at: 3/1/2006 6:10 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/1/2006 6:10 AM	Rate (0)
MHD Posts: 2 Rating: (0)	[:)] Hi... Does anybody have experiance to develop own Channel for TCP/IP or Industrial Ethernet S7 300/400 that in each message (tag value) has a timestamping from the remote RTU source. Today, WinCC always has timestamping based on the time of WinCC computer itself. Usually, we need timestamp based on real time of remote RTU. Can we develop it with CDK or ODK ? Where can we get the manual instruction ? Thanks MHD
MHD Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

3/1/2006 7:52 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi MHD, this S7-block may be interesting for you: http://support.automation.siemens.com/WW/view/en/22028441 http://support.automation.siemens.com/WW/view/en/20614217 for developing your own channels you need CDK: http://www.allmendinger.de/002_RK/WinCC/FrameIndex.htm nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on