Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

Global Alarm Acknowlege

Created by: ranr_mids at: 3/7/2006 4:35 PM (22 Replies)

Rating (2)

Thanks 0

Result pages:: |; 1 | 2 | 3; |

23 Entries

Entries per page: 10 | 20 | all

3/10/2006 10:10 AM	Rate (0)
Jaapie Gold Member Joined: 1/17/2006 Last visit: 7/19/2024 Posts: 800 Rating: (63)	Hi Salma, Do you know if it's also working when using ALARM_8P? Whe usualy work with this block. Jaap

Suggestion To thank Quote Answer

3/10/2006 10:26 AM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	Hi Jaap There you have me as I don't know [:blush:] Typically the acknowledge tag should be set as a PLC tag so that when an acknowledge is done from WinCC it is sent to the PLC and can then be passed on to any connected HMIs. If I remember correctly, Alarm_SP is a block that does this central acknowledgement for you from the PLC so I think the two may be incompatible. Of course I am only guessing. Maybe someone else has tried this ... ?

Suggestion To thank Quote Answer

3/10/2006 11:37 AM	Rate (0)
Jaapie Gold Member Joined: 1/17/2006 Last visit: 7/19/2024 Posts: 800 Rating: (63)	Yes, I hope someone else knows it. Because we use the ALARM_8P in 99% of our projects. But I think it is not possible. Any experts?

Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3; |

23 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Follow us on