Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

ET200S SI1 communication with S7 - 1200 Tia Portal

Created by: McFi at: 2/7/2023 9:43 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/7/2023 9:43 AM	Rate (0)
McFi Joined: 8/26/2022 Last visit: 3/6/2023 Posts: 6 Rating: (0)	Good morning, I have a problem with RS232 communication. I am using 6ES7 138-4DF01-0AB0 module placed on ET200S, which is connected by PROFINET to S7 - 1200. Project is made in Tia Portal v14SP1. I want to receive ASCII data from SI module but I don't know what kind of communication block should I use. I wanted to install S_RCV packages but I don't know if it is compatible to Tia Portal v14. Could you help me to properly set communication block? Thanks in advance Maciej

Suggestion To thank Quote Answer

2/7/2023 10:13 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 3/31/2023 Posts: 3399 Rating: (478)	Hi, the new instructions of the S7-1200 can only be used for the PtP communication modules of the ET200SP and ET200MP; there are no instructions yet for the 1SI of the ET200S; this cannot be operated on the S7-1200; Regards, Towome
	Last edited by: Towome at: 02/07/2023 10:15:31 If my post was useful, please rate me - thank you!
Suggestion To thank Quote Answer

2/8/2023 7:29 AM	Rate (0)
McFi Joined: 8/26/2022 Last visit: 3/6/2023 Posts: 6 Rating: (0)	Ok, so why there is allowed to insert ET200S to project. I understand that we can use I/O but then SI1 (or any communication hardware) should be not visible. Nonsens.

Suggestion To thank Quote Answer

2/8/2023 8:29 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 3/31/2023 Posts: 3399 Rating: (478)	Ask Siemens for further details!
	If my post was useful, please rate me - thank you!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on