Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

communication s7-1200 and logo

Created by: AutoGen_1556928 at: 5/3/2024 7:57 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/3/2024 7:57 AM	Rate (0)
AutoGen_1556928 Joined: 2/18/2024 Last visit: 5/8/2024 Posts: 16 Rating: (0)	Hi for my project I would like to communicate between a logo8 and an s7-1200. in fact, I want to be able to read the inputs or the different blocks of logo8, process them in the s7-1200 and be able to activate the outputs of logo8. Is that possible ? and how to achieve this?

Suggestion To thank Quote Answer

5/3/2024 9:15 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/11/2024 Posts: 8768 Rating: (1170)	Hello, Have you seen this faq: LOGO! - S7 Connection with LOGO! Client and S7-1200/1500 Server Perhaps it might help. Best regards, Wizard

Suggestion To thank Quote Answer

5/3/2024 10:13 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/11/2024 Posts: 34185 Rating: (4260)	AutoGen_1556928 Hi for my project I would like to communicate between a logo8 and an s7-1200. in fact, I want to be able to read the inputs or the different blocks of logo8, process them in the s7-1200 and be able to activate the outputs of logo8. Is that possible ? and how to achieve this? Yes, it's possible. Take also a look at this topic: How to communicate S7-1500 PLC with Logo PLC?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on