Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simocode Ethernet routing with S7 300 series CPU

Created by: Waterboy at: 5/20/2008 11:28 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/20/2008 11:28 AM	Rate (0)
Waterboy Posts: 85 Rating: (6)	Hi, Is it possible to have ethernet routing with the Simocode when the CPU is of S7 300 series (CPU317 in my case)? With same set of settings I am able to configure the ethernet routing successfully with S7-400 series CPU. But for CPU 317 it says "Connection to the device can not be opened" I am using Simocode pro V (Basic Type1) (Order no. 3UF7 010-1A*00-0) in the hardware configuration, the Simocode ES version is2004+SP3+HF1 Professional , the Simatic Manager version is V5.4 +SP3 + HF1. Thanks.
Waterboy Posts: 85 Rating: (6)	Last edited by: Waterboy at: 5/20/2008 11:28 AM
Suggestion To thank Quote Answer

5/26/2008 1:39 PM	Rate (0)
LesPaul Posts: 467 Rating: (59)	Hi Waterboy, with S7 317-2 it should work. If possible, please send your Step 7 project as zip-file to the following address: technical-assistance@siemens.com regards
LesPaul Posts: 467 Rating: (59)
Suggestion To thank Quote Answer

6/23/2008 12:42 PM	Rate (0)
NickeNyfiken Posts: 65 Rating: (1)	Hi I am curious in that mather to. I am using 317-2dp with ethernet between PC and PLC via Cp kort (6GK7343-1-EX11...) Software simocode prof 2004 and the simocode type C are connected to profibus. I cant se any interface in the simocode program that indicate possible connection via routing. Is it real possible???
NickeNyfiken Posts: 65 Rating: (1)
Suggestion To thank Quote Answer

9/4/2008 1:32 PM	Rate (0)
swilly Posts: 52 Rating: (4)	Only OM simocode pro support the routing fuction. Select and install OM simocode pro during you intall the SIMOCODE ES professional software. Hope this help. Attachment SIMOCODE ES routing.pdf (977 Downloads)
swilly Posts: 52 Rating: (4)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on