3/2/2023 2:19 PM | |
Joined: 1/16/2021 Last visit: 7/5/2024 Posts: 2 Rating:
|
Hello there, We installed Desigo 5.1 and installed 2 quality updates. When we start our project in SMC, the GMS Bacnet driver stage cannot pass the initalizing step, and the project goes to a stop state. The photo shows the malfunctioning wccoagmsbacnet phase. We never had such a problem before. Have you encountered such a problem before? Smc log files: [snip] AttachmentFiles.zip (291 Downloads) |
Last edited by: sahin100 at: 03/02/2023 14:45:50Last edited by: Jen_Moderator at: 03/03/2023 09:19:55Link removed and all files attached as .zip file. |
|
Follow us on