2/29/2024 11:19 AM | |
Joined: 7/30/2018 Last visit: 5/20/2024 Posts: 2 Rating: (0) |
Hi, I also faced similar issue, but we found the issue is with the base module itself.We replaced with a new base module and the error is gone. Please check the hardware configuration for power supply diagnostics on the CM PtP module and see whether 24VDC supply is healthy at the module. Please check below link as well. https://support.industry.siemens.com/cs/cy/en/view/109815286 |
Last edited by: The Helping Hand at: 03/01/2024 10:16:41Link optimized |
|
Follow us on