If you would make your own WinAPI program, it would be able to read actual SD card size and size of the files, program could be automatic and run on the back. This is something i would not recommend, because it is not that simple to make and there is some problems with these programs.

  OK sir i will follow as you suggested , i will go with audit trial.

Sub CheckFileSize()

Dim fs, fso

Dim filePath, file, fileSize, files

Const storageMediaSize = 2400000 'Size in Bytes, change to what ever you like

On Error Resume Next

Const Path = "\Storage Card SD\Batch\" ' Path to folder where files are

SmartTags("storageMediaSize") = storageMediaSize

Set fso = CreateObject("FileCtl.FileSystem")

Set fs = CreateObject("FileCtl.File")

file = fso.Dir(Path & "*.*") 'Opens first file from directory

Do While file <> "" ' Loops through all files

  file = Path & file

  fs.open file, 1

  fileSize = fileSize + fs.LOF

  fs.close

  files = files + 1

  file = fso.Dir() ' Use with out parameters after first call

Loop

If Err.Number <> 0 Then

  Err.Clear

  ShowSystemAlarm("File cannot be opened")

  

Else

  SmartTags("fileSize") = fileSize

  SmartTags("files") = files

  ' Do what ever calculations you need

End If

fs.close

Set fs = Nothing

Set fso = Nothing

End Sub

 Pretty easy way to calculate combined file size in given folder.

There can be some mistakes in the code, haven tested. Also it is only a demo, not necessarily what i would use.

I don't know if there is a specific manual to do this. You should learn VB file handling in general.

 Hi Mr.K_Ohjus,

Pretty easy way to calculate combined file size in given folder.

There can be some mistakes in the code, haven tested. Also it is only a demo, not necessarily what i would use.

I don't know if there is a specific manual to do this. You should learn VB file handling in general

 Thnk you very much Mr.K_Ohjus, i will try this and update you. 

Hi,

You can also get file size FileSystemObject(fso).FileLen(path).

Update after testing:

If one would apply this or similar method to calculate file sizes, it is surprisingly slow.  It works fine with couple hundred files.

I have 1500 pdf's with total size of 250Mb (small total size) and getting total size takes about 40 seconds, not optimal. I knew it would be slow but...I use USB, not SD. And with scripts you don't know it is executing unless you set and reset some loading bit in script.

I of course save file size after generation and add it to total size. But sometimes there might be need for checking size.

Hi,

am trying to do data log to sd card and incase if sd card memory is about to full i need to give warning and incase if memory full i need to give alaram.

as i read your previous post regarding can you please share me script/backup for both functionality

Hi,

am trying to do data log to sd card and incase if sd card memory is about to full i need to give warning and incase if memory full i need to give alaram.

as i read your previous post regarding can you please share me script/backup for both functionality

GUWS

 Hi Mr.K_Ohjus,

Pretty easy way to calculate combined file size in given folder.

There can be some mistakes in the code, haven tested. Also it is only a demo, not necessarily what i would use.

I don't know if there is a specific manual to do this. You should learn VB file handling in general

 Thnk you very much Mr.K_Ohjus, i will try this and update you. 

 Hi,

Tried running Windows-based sample script from this link but doesn't return Path and Result value. I'm using WinCC Advanced V15.1 (PC Station).
I browsed this thread and found screenshot from GUWS which returned directory (Windows CE).

I was searching function which detects media, like SD Card or Flash drive, if present or not prior to execute copy of logs. 

 

HI Mr.K_Ohjus,

Thanks for your reply,

Please find the below link i tried this one , but in my program the script is showing an error.

Actually i don't have tia v15 software so i can't check the back up.Please suggest whether this will work or not.

https://support.industry.siemens.com/cs/document/89855157/how-do-you-use-a-script-to-determine-whether-a-storage-drive-with-removable-media-(usb-stick-sd-mm-card)-is-ready-for-writing-on-an-hmi-device-?dti=0&lc=en-HN

And i am confused the difference between Windows CE panel vs Windows Panel , i am thinking that windows CE refers to be HMI panels And windows is refer to be scada panel i am right ? please confirm 

And also please check the below link and i tried this also 

http://plc.myforum.ro/sd-mm-card-ready-for-writing-on-an-hmi-device-vp19107.html?highlight=

 And kindly share the back up if any one have tia v14 software.

Regrds,

GUWS

Hi,

You are just getting the drive object to a variable, result is what you are returning.

Result returns 0 if specified path is available. In other words if you can instantiate the drive object. Otherwise you get some error number, which you can check from VBS documentation if you like. Usually it is good enough to assume that drive or file does not exist.

You can get all available drives like in code snippet. But if you are checking if some drive exist you don't need to get any paths, you need to provide it.